375 Bypass Valve
The new Lee 375 Bypass Valve is designed to shunt flow across an actuator piston when the system pressure is either shut off or lost. The 375 Bypass Valve is normally open device, with a hydraulically-actuated pilot-to-close feature.
This miniature valve weighs only 16 grams and is designed for 4000psi systems. The metal components are constructed entirely of stainless steel for durability and long life. Each Lee Bypass Valve is 100% tested and inspected to ensure reliable, consistent performance.Further information
250 PRI Pressure Relief Valve
The new 250 PRI pressure relief valve is the latest addition to Lee’s line of miniature pressure relief valve inserts. This new valve is ideally suited for low flow hydraulic applications where a miniature, light weight pressure relief valve is needed. The 250 PRI is only 1.1 inches long and weighs only 4.5 grams. A Lee Safety Screen is incorporated at the inlet of the valve for protection.
Available in forward and reverse relief flow configurations, the 250 PRI is available in a wide range of standard cracking pressures from 80 to 3600 psid, and is constructed entirely of stainless steel for durability and long life. Each 250 PRI is 100% tested and inspected to ensure reliable, consistent performance.Further information
500 High Pressure Flosert
The new Lee High Pressure 500 Flosert is pressure compensated to provide a constant flow over a wide range of pressure differentials. This new valve is ideal for high pressure hydraulic applications with system pressures up to 5000 psi. Nominal weight is just 32 grams. Available in forward and reverse regulated flow configurations, the High Pressure 500 Flosert is constructed entirely of stainless steel for durability and long life. Regulated flow rates are available from 1.5 to 5.0 GPM. Each Flosert is 100% tested and inspected to ensure reliable, consistent performance.Further information
Hi-Q Pressure Relief Valve
The Hi-Q Pressure Relief Valve is designed for applications that require both a high relief pressure and a high flow rate in a compact package. This new relief valve is capable of relief pressures up to 5400 psid and 19 USGPM. The valve utilizes a side inlet flow path to help minimize the installation boss size and weight. The Hi-Q Pressure Relief Valve is offered in a range of cracking pressures from 1,000 to 5,400 psid and is designed for use with nominal system pressures up to 5,000 psi and peak pressures up to 6,750 psi.Further information
NACE Compliant 15,000psi Check Valves
The new range of Lee check valves has been specifically designed for the harsh duty applications found in the Oil Tool Industry such as chemical injection. They are constructed entirely of corrosion-resistant materials that are compliant with NACE specification MR0175/ISO 15156. These check valves feature a durable MP35N poppet and seat and they have been designed for checked direction pressures up to 15,000 psid. The NACE Compliant High Pressure Check Valves are available in free flow forward and free flow reverse directions, with cracking pressures of 5±3 and 1±0.5 PSID in sizes from 0.125" to 0.500" in diameter.Further information
Quiet Operation 3 Way Solenoid Valve
The Lee Company’s new Quiet Operation High Density Interface (HDI) is a 3-way solenoid valve designed to achieve patient comfort by reducing actuation noise by 50%. A typical solenoid valve has an inherent clicking sound when energized, which is caused by the metal-to-metal contact of the moving armature and stationary core. This new quiet operation design uses “whisper” technology to provide a sound level measurement of less than 37 dBA when measured at a distance of 24 inches and a valve cycle frequency of 10 Hz. Available in face mount, plug-in and ported configurations, the Quiet Operation HDI is ideal for medical applications flowing gas or air, such as dialysis machines, patient monitors, ventilators/respirators and other bedside medical devices.Further information
Lo Lohm HDI Solenoid Valve
The Lee Company’s High Density Interface (HDI) solenoid valve has been improved by offering more flow capacity without sacrificing size and weight. The Lo Lohm HDI solenoid valve provides the features of a large valve coupled with the superior performance of a miniature valve in one compact design. A spike and hold voltage drive is used to achieve an extended flow and pressure range. Performance parameters can be optimized for a specific application.Further information
Manual Override Solenoid Valve
A new solenoid valve has been developed which has a manual override capability for typical applications in engine cowl door systems and cargo door actuators on commercial aircraft and in rotor blade fold units on military helicopters. Currently available in a single coil normally closed configuration for 4,000psig systems, the valve can be designed with single or dual coils in normally closed or normally open configurations for operation in 3,000 or 5,000 psi systems .
Atomizing Nozzles Offer Precise Spray Pattern
The new atomizing nozzles, available in both airless and air-assisted styles, generate a 50-degree hollow cone spray pattern and offer precise, controlled atomization in a compact package. The airless atomizing nozzles do not require an external air supply and will atomize with pressures as low as 20 psi (on water).
Available in multiple flow ranges, the nozzles can be installed directly onto a proprietary VHS micro-dispense solenoid valve for precise flow control using pulse-width modulation (PWM).
The air-assisted nozzles utilize an external air source to control the atomization, allowing lower operating pressures (5 psi). The pressure of the liquid and air can be independently controlled to fine-tune the flow rate and nozzle performance.
Atomizing nozzles with special mounting configurations and PEEK wetted materials are available upon request.Further information
CB Solenoid Valve
The new Lee CB Solenoid Valve is economically designed, utilizing a cartridge bobbin coil coupled with our unique MultiSeal™ technology. The MultiSeal radically simplifies port layout by allowing total porting flexibility 360° around the seal, without the need for O-Rings or anti-Extrusion Rings. Weighing just 0.16 pounds, the CB Solenoid valve is a 3 way, normally closed design that is offered in both single coil and dual coil configurations with the lead wires exiting at either end of the valve and it will flow 0.31 USGPM at 3000psid .